DIN RAIL TIMER – [ABM]

• 900XC

  : A cyclic timer with adjustable ON and OFF times.

• 900S

  : A low-cost, single-function (on-delay) timer with a single time range (e.g., 0-60 seconds).

• 900SD

  : A specific Star-Delta timer used for motor starting applications.

• 900XMR

  : A Forward-Pause-Reverse timer with multiple time ranges. 

• Function: Single function, specifically On-Delay mode. This means that when power is applied, the output relay activates only after a preset time has elapsed.
• Time Range: It is a single-range timer, commonly available in a 0-60 second range, though other specific single ranges may exist.
• Mounting: Designed for mounting on a standard 35mm DIN rail.
• Output Contact: Features one Changeover (C/O) relay contact.
• Contact Rating: The contacts are rated for 5A at 250 VAC or 24 VDC (resistive load).
• Supply Voltage: Commonly available in supply voltages such as 230/415 VAC, 50Hz.
• Application: Ideal for applications where a simple, reliable time delay is needed, such as controlling geysers, motors, heaters, or lighting, where devices need to turn off automatically after a set period.
• Design: Compact and lightweight design, typically housed in a durable plastic body. 

The 

 is a single-function, single-range On-Delay timer designed for straightforward, cost-effective timing applications.

• Model: 900S
• Function: On-Delay mode
  
  • Operation: When power (supply voltage) is applied to the A1 and A2 terminals, the internal relay remains off for the duration of the set time. After the time interval expires, the relay energizes and the output contacts change state (from normally open to closed, and normally closed to open). The relay stays energized until the power supply is removed.
• Time Range: The most common configuration is a fixed range of 0-60 seconds (adjustable via a knob on the front panel).
• Supply Voltage Options: Available for various standard voltages, commonly 230/415 VAC, 50Hz. Other options may exist depending on the specific model variant.
• Output Contacts: 1 Changeover (C/O) contact. This provides both a normally open (NO) and a normally closed (NC) connection.
• Contact Rating: Rated for 5A at 250 VAC or 24 VDC (resistive load).
• Mounting: Standard 35mm DIN rail mounting.
• Weight: Approximately 80 grams.
• Design: Compact, single-module plastic housing suitable for control panels.
• Indicators: Typically includes an LED indicator to show the status of the power supply and/or relay operation.